Mogami 2549 Multicolor Key Signal 2-way Splitter | XLR 1 to 2 Parallel | Balanced

Description

This is a professional utility cable.

No signal summing, no buffering — just a clean parallel split.

┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉

SELECT YOUR OPTIONS ABOVE:

• Length（×1 XLR to ×2 XLR）: 1 ft / 2 ft / 3.3 ft （1 m）/ 4 ft / 6 ft / 10 ft（3 m) / 15 ft
• Connector: - XLR Female (NC3FXX-B) → XLR Male (NC3MXX-B)
• Color variation: Black / Yellow / Blue

┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉

Professional Splitter Cable

Mogami 2549 × Neutrik XLR

This splitter cable began with a simple customer request: “Can you make one?”

Using genuine Mogami 2549 cable and Neutrik connectors, each unit is hand-assembled and carefully soldered in Tokyo.

A solid, no-nonsense specification, with color options added for practical identification.

A simple, reliable 1-in → 2-out XLR splitter for line-level balanced signals.

Designed for sidechain/key distribution, studio patching, and general utility routing.

Mogami 2549 is chosen for its low capacitance and mechanical stability,

making it well suited for clean, reliable line-level signal distribution.

┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉

Typical Pro Use Cases

1) Sidechain / Key distribution (line-level)

• Kick key → 2 compressors
• One send → compressor key + gate key
• Any line output → multiple processor key/trigger inputs

2) Studio utility routing (line-level)

• One line out → recorder + monitor input
• Quick A/B comparison (same source to two inputs/chains)
• Feeding a meter/analyzer while sending the same signal to another input

┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉

What This Cable Does

• Duplicates the same balanced signal to two outputs.
• XLR pinout is wired straight-through in parallel:

Pin 1 → Pin 1 (shield/ground)

Pin 2 → Pin 2 (hot/+)

Pin 3 → Pin 3 (cold/−)

• Both outputs are electrically parallel.

There is no isolation or buffering.

┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉

IMPORTANT NOTES (Please Read)

• Intended use: ONE output → TWO inputs (1 out → 2 in).

NOT for combining two outputs into one input (2 out → 1 in).

• Not intended for microphones / mic-level splitting.

Do NOT use this to split one microphone to two mic preamps.

PHANTOM POWER use is NOT supported / NOT intended.

• This is NOT a stereo-to-dual-mono splitter.

It does not separate L/R.

It duplicates the same balanced signal to two outputs.

┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉

Build / Components

• Cable: Mogami 2549
• Connectors: Neutrik NC3FXX-B / NC3MXX-B
• Each unit is continuity-tested before shipping

┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉

Bulk Orders & Professional Supply

We specialize in strategic sourcing and have a deep understanding of the technical demands and logistical challenges musicians and audio professionals face when it comes to cables.

Our goal is to simplify the process and deliver the exact cables you need — quickly and reliably.

• Bulk Quantities: Orders of 10, 20, or more cables can often be shipped within 1 business day if in stock.

• Lead Time for Non-Stock Items: Typically 1–7 business days.

==================================

“NEKODEN” TOKYO JPN

Neko Densen AUDIO CABLES

Handcrafted Professional Cabling

Precision Soldering – Japan Made