Mogami 2944 Key Signal 2-way Splitter – XLR 1 to2 Parallel – Line-Level Balanced

Description

This is a professional utility cable.

No signal summing, no buffering — just a clean parallel split.

┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉

SELECT YOUR OPTIONS ABOVE

• Length（×1 XLR to ×2 XLR）: 1 ft / 2 ft / 3.3 ft （1 m ）/ 4 ft / 6 ft / 10 ft （3 m）/ 15 ft

• Color: 

• Connector:

 - 1 × XLR Female (NC3FXX-B) → 2 × XLR Male (NC3MXX-B)

┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉

 

Professional Utility Splitter Cable:

Mogami 2944 × NEUTRIK XLR

Mogami 2944 Ultra-Flexible Key Splitter — XLR(F) to 2×XLR(M) — Line-Level Balanced — Neutrik — Assembled in Tokyo

A compact, ultra-flexible 1-out → 2-in XLR splitter for LINE-LEVEL balanced signals.

Optimized for tight rack spaces, sidechain/key distribution, and studio utility routing.

Mogami 2944 is chosen for its slim Ø2.5mm profile and exceptional flexibility,

making it ideal for clean, low-profile signal distribution in confined setups.

⸻

 

Typical Pro Use Cases

 

1) Sidechain / Key distribution (line-level)

• Kick key → 2 compressors

• One send → compressor key + gate key

• Any line output → multiple processor key/trigger inputs

 

2) Studio utility routing (line-level)

• One line out → recorder + monitor input

• Quick A/B comparison (same source to two inputs/chains)

• Feeding a meter/analyzer while sending the same signal elsewhere

 

3) Rack / Patchbay environments

• Clean splits in tight rack spacing

• Permanent utility routing behind gear

• Lightweight splitter for minimal connector stress

 

⸻ 

Why Mogami 2944 Here?

• Ultra-slim Ø2.5mm cable body

• Extremely flexible for tight routing

• Low mechanical stress on XLR connectors

• Ideal for short, line-level utility applications

Mogami 2944 is an ultra-flexible, slim balanced cable optimized for compact routing and utility applications.

While it offers excellent flexibility and clean line-level performance, it is not designed as a heavy-duty stage cable.

This splitter version is intended primarily for studio, rack, and fixed routing use where flexibility and low-profile wiring are prioritized over rugged touring durability.

 

⸻

What This Cable Does

• Duplicates the same balanced signal to two outputs.

• XLR pinout is wired straight-through in parallel:

Pin 1 → Pin 1 (shield/ground)

Pin 2 → Pin 2 (hot/+)

Pin 3 → Pin 3 (cold/−)

• Both outputs are electrically parallel.

There is no isolation or buffering.

 

⸻

 

IMPORTANT NOTES (Please Read)

 • Intended use: ONE output → TWO inputs (1 out → 2 in).

NOT for combining two outputs into one input (2 out → 1 in).

 • Not intended for microphones / mic-level splitting.

Do NOT use this to split one microphone to two mic preamps.

PHANTOM POWER use is NOT supported / NOT intended.

• This is NOT a stereo-to-dual-mono splitter.

It does not separate L/R.

It duplicates the same balanced signal to two outputs.

 • Designed primarily for short line-level utility use.

Not intended for heavy stage use or repeated high-stress pulling.

 

⸻

 Build / Components

 

• Cable: Mogami 2944 (Ø2.5mm, shielded 2-conductor)

• Connectors: Neutrik NC3FXX-B / NC3MXX-B

• Each unit is continuity-tested before shipping

┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉

Bulk Orders & Professional Supply

We specialize in strategic sourcing and have a deep understanding of the technical demands and logistical challenges musicians and audio professionals face when it comes to cables.

Our goal is to simplify the process and deliver the exact cables you need — quickly and reliably.

• Bulk Quantities: Orders of 10, 20, or more cables can often be shipped within 1 business day if in stock.

• Lead Time for Non-Stock Items: Typically 1–7 business days.

==================================

“NEKODEN” TOKYO JPN

Neko Densen AUDIO CABLES

Handcrafted Professional Cabling

Precision Soldering – Japan Made